Classes of motor vehicle repair work

What classes of vehicle work can you apply for as a motor vehicle repairer.

Classes of motor vehicle repair work

Under the , motor vehicle repair businesses are required to hold a business licence but they are no longer required to hold separate or additional licenses for each and every class of motor vehicle repairs.

A repair business must ensure repair work is only carried out by a person who holds a certificate for the specific class of repair work, or where a person does not possess a certificate, their work is supervised by a person who holds a certificate for that class of repair work.

There are 23 prescribed classes of repair work for which a repairer's certificate can be granted.   

The following information outlines the classes of repair work for which a person can be certified under the Act and Regulations.

As a guide, we have included (under the class of repair work) the current Australian Automotive Retail, Services and Repair Training Package (AUR) qualifications or units you could use to obtain certification (ie. AUR99, AUR05, AUR12 or AUR equivalent).

You only need to apply for the classes you are directly involved with. For example, to do repairs to a motor vehicle, a mechanic may need to remove a body panel or a seat, but not repair it. This does not mean they need to apply for the classes of Panel Beating Work and Trimming Work, only Light Vehicle Work. Generally, you will qualify to do what you were taught during your training or apprenticeship.

Classes of motor vehicle repair work

Air conditioning work (ACW)

Definition

Any work required to install, service, repair, overhaul, remove or retrofit an air conditioning system in a heavy vehicle or light vehicle.

Requirement:

Training packageCodeTitle
AUR99AUR20799Certificate II in Automotive
(Mechanical 鈥 Air Conditioning)
AUR05AUR20705Certificate II in Automotive Mechanical
Specialisation: Air Conditioning
AUR12AUR20212Certificate II in Automotive Air Conditioning Technology
AURAUR20218Certificate II in Automotive Air Conditioning Technology
AURAUR20220Certificate II in Automotive Air Conditioning Technology

AND

A person must hold an automotive air conditioning licence granted under Subdivision 6A.2.2 of the Ozone Protection and Synthetic Greenhouse Gas Management Regulations 1995 of the Commonwealth.

Associated classes

Also entitles the motor vehicle repairer to carry out work associated with class EAF.

Body building work (BBW)

Definition

Any work required to do any of the following:

  • to fabricate or modify a body of a motor vehicle to fit the vehicle's chassis;
  • to fit the chassis of a motor vehicle with a fabricated or modified body;

but does not include any of the following:

  • realigning the chassis of a motor vehicle;
  • realigning, repairing, preparing for painting or painting a panel, frame or other component of the body of a motor vehicle;
  • installing or removing any glass in the body of a motor vehicle,

other than installing or removing any moveable glass, if required.

Requirement:

Training packageCodeTitle
AUR99AUR31599Certificate III in Automotive (Vehicle Body 鈥 Building)
AUR05AUR30805Certificate III in Automotive Vehicle Body
Specialisation: Body Building
AUR12AUR32112Certificate III in Automotive Body Repair Technology
AURAUR32116Certificate III in Automotive Body Repair Technology
AURAUR32120Certificate III in Automotive Body Repair Technology

Associated classes

Also entitles the motor vehicle repairer to carry out work associated with classes EAF and MAF.

Brake work (BRW)

Definition

Any work required to service, repair, overhaul or modify a braking system that is, was, or may be, fitted to a motor vehicle.

Requirement:

Training packageCodeTitle
AUR99AUR30399Certificate III in Automotive (Mechanical 鈥 Brakes)
AUR05AUR30605Certificate III in Automotive Specialist
Specialisation: Brakes
AUR05AUR30611Certificate III in Automotive Specialist
Specialisation: Brakes
AUR12AUR32512Certificate III in Automotive Underbody Technology
AURAUR32516Certificate III in Automotive Underbody Technology
AURAUR32518Certificate III in Automotive Underbody Technology

Cooling system work (CSW)

Definition

Any work required to service, repair, overhaul or modify a cooling system that is, was, or may be, fitted to a motor vehicle.

Requirement:

Training packageCodeTitle
AUR99AUR21299Certificate II in Automotive (Mechanical 鈥 Radiator Repairs)
AUR05AUR20705Certificate II in Automotive Mechanical
Specialisation: Cooling System
AUR12AUR21412Certificate II in Automotive Cooling System Technology
AURAUR21416Certificate II in Automotive Cooling System Technology
AURAUR21220Certificate II in Automotive Underbody Technology (Radiator and Cooling System Repairs)

Diesel work (DSW)

Definition

Any work required to do any of the following 鈥
  • (a) to service, repair, overhaul or modify any of the following that is, was, or may be, fitted to a heavy vehicle or light vehicle 鈥
    • (i) a diesel fuel system;
    • (ii) a diesel engine;
  • (b) to service, repair, overhaul or modify any of the following that is, was, or may be, fitted to a heavy vehicle or light vehicle propelled by a diesel engine 鈥
    • (i) an air induction system;
    • (ii) an ignition system;
    • (iii) an engine management system;
    • (iv) a cooling system;
    • (v) a hydraulic system
  • (c) to fabricate, service, repair or modify the exhaust system of a heavy vehicle or light vehicle propelled by a diesel engine.
 
Requirement:
Training packageCodeTitle
AURAUR31416Certificate III in Automotive Diesel Fuel Technology
AURAUR31516Certificate III in Automotive Diesel Engine Technology
AURAUR31420Certificate III in Automotive Diesel Fuel Technology
AURAUR31520Certificate III in Automotive Diesel Engine Technology

Associated classes

Also entitles the motor vehicle repairer to carry out work associated with classes HVS, LVS, MAF, MCS, CSW, EAF and ERW.

Electrical accessory fitting work (EAF)

Definition

Any work required to install or remove an electrical accessory to a motor vehicle, except an electrical accessory that does not affect the performance, safety or security of the motor vehicle.

Requirement:

Training packageCodeTitle
AUR99AUR20699Certificate II in Automotive (Electrical 鈥 Accessory Fitting)
AUR05AUR20405Certificate II in Automotive Electrical Technology
AUR05AUR20408Certificate II in Automotive Electrical Technology
AUR12AUR20412Certificate II in Automotive Electrical Technology
AURAUR20416Certificate II in Automotive Electrical Technology
AURAUR20420Certificate II in Automotive Electrical Technology

Electrical work (ELW)

Definition

Any work required to install, service, repair, overhaul or remove any of the following in a motor vehicle:

  1. any electrical equipment or system (including any electrical accessory and any electrical component associated with any other prescribed accessory);
  2. any electrical part of any other thing or system.

Requirement:

Training packageCodeTitle
AUR99AUR30199Certificate III in Automotive (Electrical)
AUR05AUR30305Certificate III in Automotive Electrical Technology
AUR05AUR30308Certificate III in Automotive Electrical Technology
AUR12AUR30312Certificate III in Automotive Electrical Technology
AURAUR30316Certificate III in Automotive Electrical Technology
AURAUR30320Certificate III in Automotive Electrical Technology

Associated classes

Also entitles the motor vehicle repairer to carry out work associated with class EAF, HVS, LVS and MCS.

Engine reconditioning work (ERW)

Definition

Any work required to overhaul an engine (including a cylinder head of an engine) that is, was, or may be, fitted to a motor vehicle.

Requirement:

Training packageCodeTitle
AUR99AUR30799Certificate III in Automotive (Mechanical 鈥 Engine Reconditioning)
AUR05AUR30605Certificate III in Automotive Specialist
Specialisation: Engine Reconditioning
AUR12AUR31312Certificate III in Automotive Engine Reconditioning
AUR12AUR31512Certificate III in Automotive Engine Reconditioning
AURAUR31316Certificate III in Automotive Engine Reconditioning

Associated classes

Also entitles the motor vehicle repairer to carry out work associated with class DSW.

Glazing work (GLW)

Definition

Any work required to install, repair or remove a windscreen or other glass in the body of a motor vehicle.

Requirement:

Training packageCodeTitle
AUR99AUR22799Certificate II in Automotive (Vehicle Body 鈥 Glazing))
AUR05AUR20905Certificate II in Automotive Vehicle Body
Specialisation: Vehicle Glazing
AUR12AUR20912Certificate II in Automotive Body Repair Technology
AURAUR32216Certificate III in Automotive Glazing Technology
AURAUR322200Certificate III in Automotive Glazing Technology

Heavy vehicle servicing work (HVS) (gross vehicle mass of more than 8000 kg)

Definition

Any work required to do any of the following:

a. in respect of a heavy vehicle to which paragraph (b) does not apply, to carry out minor electrical servicing or to service any of the following -

  • the fuel system;
  • the air induction system;
  • the engine;
  • the ignition system;
  • the engine management system;
  • the cooling system;
  • the driveline;
  • any electronic drive management system;
  • the braking system;
  • the steering system;
  • the suspension system;
  • a wheel assembly;
  • any hydraulic system;

b. in respect of a heavy vehicle during an emergency break down -

  • to diagnose the cause of the breakdown;
  • to carry out emergency servicing or repair on a thing diagnosed as the cause or possible cause of the breakdown.

Requirement:

Training packageCodeTitle
AUR99AUR21799Certificate II in Automotive (Mechanical 鈥 Vehicle Servicing)
AUR05AUR20505Certificate II in Automotive Vehicle Servicing
Specialisation: Heavy Vehicle
AUR12AUR20512Certificate II in Automotive Servicing Technology
AURAUR20516Certificate II in Automotive Servicing Technology
AURAUR20520Certificate II in Automotive Servicing Technology

Associated classes

Also entitles the motor vehicle repairer to carry out work associated with classes LVS and MCS.

Heavy vehicle work (HVW) (gross vehicle mass of more than 8000 kg)

Definition

Any work required to do any of the following in respect of a heavy vehicle:

  1. to service, repair, overhaul or modify any of the following -
    • the fuel system;
    • the air induction system;
    • the engine;
    • the ignition system;
    • the engine management system;
    • the cooling system;
    • the driveline;
    • any electronic drive management system;
    • the braking system;
    • the steering system;
    • the suspension system;
  2. to fabricate, service, repair or modify the exhaust system;
  3. to service, repair or replace a wheel assembly;
  4. to balance a wheel or align the wheels;
  5. to service or repair any hydraulic system;
  6. to carry out minor electrical servicing or minor electrical repair;
  7. to install or remove a prescribed accessory.

Requirement:

Training packageCodeTitle
AUR99AUR30899Certificate III in Automotive (Mechanical 鈥 Heavy Vehicle Road Transport)
AUR05AUR30405Certificate III in Automotive Mechanical Technology
Specialisation: Heavy Vehicle Road Transport
AUR12AUR31112Certificate III in Heavy Commercial Vehicle Mechanical Technology
AURAUR31114Certificate III in Heavy Commercial Vehicle Mechanical Technology
AURAUR31116Certificate III in Heavy Commercial Vehicle Mechanical Technology
AURAUR31120Certificate III in Heavy Commercial Vehicle Mechanical Technology

Associated classes

Also entitles the motor vehicle repairer to carry out work associated with classes BRW, CSW, EAF, HVS, LVS, LVW, MAF, MCS, MCW, TFW, UNW and WSS.

Light vehicle servicing work (LVS) (gross vehicle mass of less than 8000 kg)

Definition

Any work required to do any of the following:

a. in respect of a light vehicle to which paragraph (b) does not apply, to carry out minor electrical servicing or to service any of the following -

  • the fuel system;
  • the air induction system;
  • the engine;
  • the ignition system;
  • the engine management system; 
  • the cooling system;
  • the driveline;
  • any electronic drive management system;
  • the braking system;
  • the steering system;
  • the suspension system;
  • a wheel assembly;
  • any hydraulic system;

b. in respect of a light vehicle during an emergency break down -

  • to diagnose the cause of the breakdown;
  • to carry out emergency servicing or repair on a thing diagnosed as the cause or possible cause of the breakdown.

Requirement:

Training packageCodeTitle
AUR99AUR21799Certificate II in Automotive (Mechanical 鈥 Vehicle Servicing)
AUR05AUR20505Certificate II in Automotive Vehicle Servicing
Specialisation: Light Vehicle
AUR12AUR20512Certificate II in Automotive Servicing Technology
AURAUR20516Certificate II in Automotive Servicing Technology
AURAUR20520Certificate II in Automotive ServicingTechnology

Associated classes

Also entitles the motor vehicle repairer to carry out work associated with classes HVS and MCS.

Light vehicle work (LVW) (gross vehicle mass of less than 8000 kg)

Definition

Any work required to do any of the following in respect of a light vehicle:

  1. to service, repair, overhaul or modify any of the following -
    • the fuel system;
    • the air induction system;
    • the engine;
    • the ignition system;
    • the engine management system;
    • the cooling system;
    • the driveline;
    • any electronic drive management system;
    • the braking system;
    • the steering system;
    • the suspension system;
  2. to fabricate, service, repair or modify the exhaust system;
  3. to service, repair or replace a wheel assembly;
  4. to balance a wheel or align the wheels;
  5. to service or repair any hydraulic system;
  6. to carry out minor electrical servicing or minor electrical repair;
  7. to install or remove a prescribed accessory.

Requirement:

Training packageCodeTitle
AUR99AUR31099Certificate III in Automotive (Mechanical 鈥 Light Vehicle)
AUR05AUR30405Certificate III in Automotive Mechanical Technology
Specialisation: Light Vehicle
AUR12AUR30612Certificate III in Light Vehicle Mechanical Technology
AURAUR30616Certificate III in Light Vehicle Mechanical Technology
AURAUR30620Certificate III in Light Vehicle Mechanical Technology

Associated classes

Also entitles the motor vehicle repairer to carry out work associated with classes BRW, CSW, EAF, HVS, LVS, MAF, MCS, MCW, TFW, UNW and WSS. 

Locksmith work (LSW)

Definition

Any work required to service, repair or replace a locking or transponder system that is, was, or may be, fitted to a motor vehicle.

Requirement:

Training PackageCodeTitle
MEMMEM30819Certificate III in Locksmithing

Mechanical accessory fitting work (MAF)

Definition

Any work required to install or remove a mechanical accessory to a motor vehicle, except a mechanical accessory that does not affect the performance, safety or security of the motor vehicle.

Requirement:

Training packageCodeTitle
AUR99AUR22499Certificate II in Automotive (Vehicle Body 鈥 Accessory  Fitting 鈥淢echanical鈥)
AUR05AUR20205Certificate II in Automotive Aftermarket Manufacturing Specialisation: Accessory Fitting
AURAUR22021Certificate II in Automotive Accessory Fitting

Motor cycle servicing work (MCS)

Definition

Any work required to do any of the following:

a. in respect of a motor cycle to which paragraph (b) does not apply, to carry out minor electrical servicing or to service any of the following -

  1. the fuel system;
  2. the air induction system;
  3. the engine;
  4. the ignition system;
  5. the engine management system;
  6. any cooling system;
  7. the driveline;
  8. any electronic drive management system;
  9. the braking system;
  10. the steering system;
  11. the suspension system;
  12. a wheel assembly;

b. in respect of a motor cycle during an emergency break down -

  1. to diagnose the cause of the breakdown;
  2. to carry out emergency servicing or repair on a thing diagnosed as the cause or possible cause of the breakdown.

Requirement:

Training packageCodeTitle
AUR99AUR21799Certificate II in Automotive (Mechanical 鈥 Vehicle Servicing)
AUR05AUR20505Certificate II in Automotive Vehicle Servicing
Specialisation: Motorcycle
AUR12AUR20512Certificate II in Automotive Vehicle Servicing Technology
AURAUR20516Certificate II in Automotive Servicing Technology
AURAUR20520Certificate II in Automotive Servicing Technology

Associated classes

Also entitles the motor vehicle repairer to carry out work associated with classes HVS and LVS.

Motor cycle work (MCW)

Definition

Any work required to do any of the following in respect of a motor cycle:

  1. to service, repair, overhaul or modify any of the following -
    • the fuel system;
    • the air induction system;
    • the engine;
    • the ignition system;
    • the engine management system;
    • any cooling system;
    • the driveline;
    • any electronic drive management system;
    • the braking system;
    • the steering system;
    • the suspension system;
  2. to fabricate, service, repair or modify the exhaust system;
  3. to service, repair or replace a wheel assembly;
  4. to balance a wheel or align the wheels;
  5. to carry out minor electrical servicing or minor electrical repair;
  6. to install or remove a prescribed accessory;
  7. to realign the chassis.

Requirement:

Training packageCodeTitle
AUR99AUR31199Certificate III in Automotive (Mechanical 鈥 Motor Cycle)
AUR05AUR30405Certificate III in Automotive Mechanical Technology
Specialisation: Motorcycle
AUR12AUR30812Certificate III in Motorcycle Mechanical Technology
AURAUR30816Certificate III in Motorcycle Mechanical Technology
AURAUR30820Certificate III in Motorcycle Mechanical Technology

Associated classes

Also entitles the motor vehicle repairer to carry out work associated with classes CSW, EAF, HVS, LVS, MAF, MCS and WSS.

Painting work (PAW)

Definition

  1. means any work required to prepare for painting or to paint a panel, frame or other component of the body of a motor vehicle, otherwise than in the course of manufacturing the vehicle; but
  2. does not include any of the following:
    • 鈥媟ealigning the chassis of a motor vehicle;
    • realigning or repairing a panel, frame or other component of the body of a motor vehicle;
    • installing or removing any glass in the body of a motor vehicle, other than installing or removing any moveable glass, if required.

Requirement:

Training packageCodeTitle
AUR99AUR31899Certificate III in Automotive (Vehicle Body 鈥 Vehicle Painting)
AUR05AUR30805Certificate III in Automotive Vehicle Body
Specialisation: Vehicle Painting
AUR12AUR32412Certificate III in Automotive Refinishing Technology
AURAUR32416Certificate III in Automotive Refinishing Technology
AURAUR32420Certificate III in Automotive Refinishing Technology

Panel beating work (PBW)

Definition

Any work required to do any of the following:

  • to realign the chassis of a motor vehicle;
  • to realign or repair a panel, frame or other component of the body of a motor vehicle;

but does not include installing, repairing or removing any glass (other than installing or removing any moveable glass) in the body of a motor vehicle.

Requirement:

Training packageCodeTitle
AUR99AUR31699Certificate III in Automotive (Vehicle Body 鈥 Panel Beating)
AUR05AUR30805Certificate III in Automotive Vehicle Body
Specialisation: Panel Beating
AUR12AUR32112Certificate III in Automotive Body Repair Technology
AURAUR32116Certificate III in Automotive Body Repair Technology
AURAUR32120Certificate III in Automotive Body Repair Technology

Associated classes

Also entitles the motor vehicle repairer to carry out work associated with classes EAF and MAF.

Trimming work (TRI)

Definition

Any work required to fabricate, repair or replace a seat or any interior lining or floor covering in a motor vehicle, except any such work that does not affect the performance, safety or security of the motor vehicle.

Requirement:

Training packageCodeTitle
AUR99AUR31799Certificate III in Automotive (Vehicle Body 鈥 Trimming)
AUR05AUR30805Certificate III in Automotive Vehicle Body
Specialisation: Vehicle Trimming
AUR12AUR32312Certificate III in Automotive and Marine Trimming Technology
AURAUR32316Certificate III in Automotive and Marine Trimming Technology
AURAUR32320Certificate III in Automotive and Marine Trimming Technology

Associated classes

Also entitles the motor vehicle repairer to carry out work associated with class MAF.

Tyre fitting work (TFW)

Definition

Any work required to do any of the following in respect of a heavy vehicle, light vehicle or motor cycle 鈥

  1. to repair or replace a rim, tyre or tube;
  2. to balance a wheel.

Requirement:

Training PackageCodeTitle
AURAUR21916Certificate II in Automotive Tyre Servicing Technology
AURAUR21920Certificate II in Automotive Tyre Servicing Technology

Underbody work (UNW)

Definition

Any work required to service or repair the braking, steering and suspension systems and to fabricate, service, repair or modify the exhaust system:

Requirement:

Training packageCodeTitle
AURAUR32516Certificate III in Automotive Underbody Technology
AURAUR32518Certificate III in Automotive Underbody Technology

Wheel aligning, steering and suspension work (WSS)

Definition

Any work required to do any of the following in respect of a motor vehicle 鈥

  1. to inspect, service or replace the steering system or suspension system;
  2. to balance a wheel or align the wheels.

Requirement:

Units of competency:

  1. AURAEA002 鈥  Follow environmental and sustainability best practice in an automotive   workplace
  2. AURASA102 鈥 Follow safe working practices in an automotive workplace
  3. AURATA001 鈥 Identify basic automotive faults using troubleshooting processes
  4. AURTTD002 鈥 Inspect and service steering systems
  5. AURTTD004 鈥 Inspect and service suspension systems
  6. AURTTJ011 鈥 Balance wheels and tyres
  7. AURLTD106 鈥 Carry out light vehicle wheel alignment operations; OR
    AURHTD104 鈥 Carry out heavy vehicle wheel alignment operations

These units can be completed as part of one of the following qualifications:

  • AUR21820 - Certificate II in Automotive Steering and Suspension System Technology
  • AUR21920 - Certificate II in Automotive Tyre Servicing Technology
  • AUR20520 - Certificate II in Automotive Servicing Technology
Last updated:
Was this page useful?